OnePLM DU 2023
Solutions Partner | Siemens

Digital University Agenda

There are 50 sessions available across 5 times slots. You can select 5 sessions to attend (one session per time slot). Your session summary, and all details, will be emailed to you after registration.
Register Now
Download the Agenda Overview

Tips & Tricks and Useful Tools in Solid Edge

This session will showcase a selection of tips and tricks to help you get the most out of the Solid Edge Design tools you currently have.

Time: 09:20 – 09:50

Room: Conference Suite 1

Meet The 
Solid Edge Development Team

In this session you will meet Jeff Walker, Director of the entire Siemens Solid Edge Development team. You will have the chance to provide feedback and ask questions about Solid Edge.

Time: 09:20 – 09:50

Room: Meeting Room 1

What’s New in NX 2306

This session will cover a high level overview of the new applications and features in NX2306.

Time: 09:20 – 09:50

Room: Lecture Room 1

NX CAD Clinic (Open Q&A)

This is an open session to drop in and ask questions to our NX CAD experts.

Time: 09:20 – 09:50

Room: Lecture Room 2

Tecnomatix – Factory Layout & Simulation

This session will show you how to design, layout, and configure factory environments and optimise factory operations using digital 3D factory models. You’ll also see how Mechatronics Concept Designer allows you to easily build a virtual model of your machine, using existing 3D CAD data.

Time: 09:20 – 09:50

Room: Boardroom

Managing and Protecting your Data with Teamcenter

Learn how to keep your CAD and Documents secure in with BoM Management, Visualization and Release control. Learn how to design and share information together with colleagues, even whilst working from home.

Time: 09:20 – 09:50

Room: South Wing 1

Mendix – Exploring Low Code Development

Join this session to learn about foundations and strengths of low code technology and how it can help you build enterprise applications 10x faster with 70% fewer resources.

Time: 09:20 – 09:50

Room: South Wing 2

NX CAE Overview and Clinic (Open Q&A)

This is an open session for all users of NX CAE and Solid Edge Simulation to get a quick overview update of the CAE tools available and an open question session at the end.

Time: 09:20 – 09:50

Room: South Wing 3

NX CAM Clinic (Open Q&A)

This is an open session to drop in and ask questions to our NX CAM experts.

Time: 09:20 – 09:50

Room: South Wing 4a

Solid Edge & NX Automation Clinic

As well as briefly demonstrating what can be achieved through customisation and automation in SE/NX, members of our in-house development team will be on-hand to discuss any automation or SE/NX Open development queries/ideas you might have. We may even have a solution already.

Time: 09:20 – 09:50

Room: South Wing 4b

What’s New in Solid Edge 2023

This session will cover what’s new in Solid Edge 2023, followed by a look at some of the exciting new features coming in Solid Edge 2024.

Time: 10:40 – 11:40

Room: Conference Suite 1

What’s New in NX 2206 and NX 2212

Join this session to take a look at some of the best new tools, features and enhancements in the last 2 releases of NX.

Time: 10:40 – 11:40

Room: Lecture Room 1

NX MDB/ PMI

In this session you will explore the power and speed of using MBD and PMI in place of 2D drawings, the new node based logic editor transforms the process of creating technical specifications.

Time: 10:40 – 11:40

Room: Lecture Room 2

NX Algorithmic Modelling

This is an introduction to the Algo Modelling tools and node based logic which will demonstrate the speed and flexibility of creating complex yet full parametric geometry.

Time: 10:40 – 11:40

Room: Meeting Room 1

Polarion – Managing Engineering Requirements

Join this session to see the innovative solutions that will transform the way you currently think about how best to capture/document engineering design requirements and product test plans.

Time: 10:40 – 11:40

Room: Boardroom

Teamcenter – What’s New

Join this session to see the PLM Portfolio Highlights – from basic CAD Data Management, through to the full PLM capability’s to meet all your needs, including the latest enhancements.

Time: 10:40 – 11:40

Room: South Wing 1

Mendix- Exploring Low Code Development

Join this session to learn about foundations and strengths of low code technology, and how it can help you build enterprise applications 10x faster with 70% fewer resources.

Time: 10:40 – 11:40

Room: South Wing 2

NX CAE Portfolio Overview

This is a session focused on the latest CAE tools with NX CAD environment. It is for NX CAD users to get an update on what simulation is now available, including what is now within the Tokens – Value Based Licensing.

Time: 10:40 – 11:40

Room: South Wing 3

Tecnomatix – Factory Layout & Simulation

This session will show you how to design, layout, and configure factory environments and optimise factory operations using digital 3D factory models. You’ll also see how Mechatronics Concept Designer allows you to easily build a virtual model of your machine, using existing 3D CAD data.

Time: 10:40 – 11:40

Room: South Wing 4a

Customisation and Automation for Solid Edge & NX

This session will show you what can be achieved in Solid Edge and NX through the automation of repetitive tasks, achieving sizeable gains in productivity and significantly increasing design data throughput.

Time: 10:40 – 11:40

Room: South Wing 4b

Solid Edge Assembly Design Masterclass

This session will take a look at the tools available in the Solid Edge Assembly Environment. It will also cover some best practices and tools you might not know about.

Time: 11:50 – 12:50

Room: Conference Suite 1

Leveraging subscription services & cloud whilst rationalising CAD portfolio

Learn how leading-edge companies are leveraging Solid Edge subscription services with Xcelerator Share to drive better collaboration between colleagues, suppliers and customers. Coupled with this, the Siemens Mechanical Design solution offers both design-focused and multi-discipline capabilities, perfectly tailored to your needs.

Time: 11:50 – 12:50

Room: Conference Suite 2

NX Topology Optimsation and Design for Additive Manufacture

This session is a demonstration of the NX Top Op tools, followed by a look at the DfAM analysis tools and lattice structure generation.

Time: 11:50 – 12:50

Room: Lecture Room 1

NX schematics/ NX Routing – A fully integrated process

In this session you can take a look at the NX electrical schematics and harness design capabilities.

Time: 11:50 – 12:50

Room: Lecture Room 2

NX Design Space Explorer

Learn how to explore and optimize hundreds of possible design iterations using expression, constraints and objectives. Design Space Explorer provides ultimate freedom to explore your parts and assemblies very early in the design process.

Time: 11:50 – 12:50

Room: Meeting Room 1

Polarion – Managing Engineering Requirements

Join this session to see the innovative solutions that will transform the way you currently think about how best to capture/document engineering design requirements and product test plans.

Time: 11:50 – 12:50

Room: Boardroom

Teamcenter – Controlling Documents and Ensuring Part Re-Use

This session will cover creating documents, mapping metadata, releasing documents and automating PDFs. You’ll also learn how to classify your data and documentation to remove duplication and ensure part re-use.

Time: 11:50 – 12:50

Room: South Wing 1

Mendix – Seeing is believing. A live app development

Get a glimpse into the low code development process, look under the hood with our expert developers and discover how an idea can turn into an app in this session.

Time: 11:50 – 12:50

Room: South Wing 2

Solid Edge CAE Portfolio Overview

This session is for users of Solid Edge who wish to learn more about Simulation options available to them.

Time: 11:50 – 12:50

Room: South Wing 3

NX CAM & Solid Edge CAM Pro – What’s New

This session will cover the brand-new functionality released this June, along with some of the headline items released over the past couple of years.

Time: 11:50 – 12:50

Room: South Wing 4a

OnePLM Itemise – Solid Edge Data Exchange & BOM Management

This session will show a solution for automatically capturing and sharing SE Bills of Materials, together with associated data files such as PDF and DXF, readily accessible/extensible in real-time across all departments.

Time: 11:50 – 12:50

Room: South Wing 4b

Solid Edge Part Design Masterclass

This session begins with an introduction to Part Design and leads to a deeper exploration of Surfacing, Generative Design Tools and Sketching.

Time: 14:00 – 15:00

Room: Conference Suite 1

Solid Edge Design Configurator

This session is an introduction to the Solid Edge Design Configurator and how it enables the automatic generation of new designs based on defined parameters and rules.

Time: 14:00 – 15:00

Room: Conference Suite 2

NX Tips & Tricks

Here we will show you some of the top tips and tricks as suggested by our consultants to help improve your workflows, we guarantee you will learning something new in this session.

Time: 14:00 – 15:00

Room: Lecture Room 1

NX UDF’s and Feature templates

If you use lots of common features across any of your designs and products then this session is for you. As well as a demonstration that shows capabilities of the UDF tools, there will also be an overview of the new Feature Template tools including how to convert your UDF’s.

Time: 14:00 – 15:00

Room: Lecture Room 2

TC Vis and Variation Analysis

Not only is Teamcenter Visualization a massively capable (but underused) tool for viewing your digital collateral without the need for specialist training or expensive CAD licenses, it can also be used for tolerance stack up analysis (variation analysis). This session will explore bother TC Vis and VSA.

Time: 14:00 – 15:00

Room: Meeting Room 1

Tecnomatix – Factory Layout & Simulation

This session will show you how to design, layout, and configure factory environments and optimise factory operations using digital 3D factory models. You’ll also see how Mechatronics Concept Designer allows you to easily build a virtual model of your machine, using existing 3D CAD data.

Time: 14:00 – 15:00

Room: Boardroom

Teamcenter  – Controlling and Planning Change

This session covers managing closed loop change with product designs and documentation, allowing the implementation tasks and deliverables to be properly planned.

Time: 14:00 – 15:00

Room: South Wing 1

Mendix – Exploring Low Code Development

Join this session to learn about foundations and strengths of low code technology and how it can help you build enterprise applications 10x faster with 70% fewer resources.

Time: 14:00 – 15:00

Room: South Wing 2

Simcenter CAE – Higher End Capabilities

This session is for users of Simcenter CAE to learn about some of the higher end capabilities, also what is available within Simcenter Value Based Tokens. Discover Assembly FEM and Large model analysis​, Specialist Durability​ and Load prediction using multi- body simulation.

Time: 14:00 – 15:00

Room: South Wing 3

NX CAM – Getting the most from your machine tools

In this session we will look at CNC machine tool capabilities and explain what they are and how they can be used to make higher quality parts more efficiently within your machine shop.

Time: 14:00 – 15:00

Room: South Wing 4a

Customisation and Automation for Solid Edge & NX

This session will show you what can be achieved in Solid Edge and NX through the automation of repetitive tasks, achieving sizeable gains in productivity and significantly increasing design data throughput.

Time: 14:00 – 15:00

Room: South Wing 4b

Solid Edge Drafting and Associated Tools

This session covers Solid Edge Drafting and an overview of the new Model View tools. It will also cover an introduction to the Advanced PMI section and a brief look at Solid Edge Inspector.

Time: 15:10 – 16:10

Room: Conference Suite 1

Solid Edge Wiring & Harness and Electrical Routing

Come and see how Solid Edge Wiring and Harness Design and MCAD routing tools can help streamline your design process; by allowing MCAD and ECAD engineers to collaborate from the initial design through to Manufacture.

Time: 15:10 – 16:10

Room: Conference Suite 2

NX Composites and WAVE

Join us for an introduction to NX composites followed by a comprehensive deep dive that showcases the full power of the WAVE (interpart modelling) tools.

Time: 15:10 – 16:10

Room: Lecture Room 1

NX Reverse Engineering and Polygon Modelling

These tools are constantly evolving and improving, in this session we will take a look at some of the new tools and workflows that can be employed when working with scans and convergent bodies.

Time: 15:10 – 16:10

Room: Lecture Room 2

NX – Creating Surfaces using Maths

With NX, the sky is the limit, if you have the knowledge and the know-how you can create some very powerful CAD models. In this session we will explore the generation of surfaces using mathematical formulae.

Time: 15:10 – 16:10

Room: Meeting Room 1

Tecnomatix – Factory Layout & Simulation

This session will show you how to design, layout, and configure factory environments and optimise factory operations using digital 3D factory models. You’ll also see how Mechatronics Concept Designer allows you to easily build a virtual model of your machine, using existing 3D CAD data.

Time: 15:10 – 16:10

Room: Boardroom

Teamcenter – Managing BOM’s and integrating through to ERP

This session will show A design Bill of Materials synchronised with CAD, looking at the needs of other disciplines such as Manufacturing Engineering, considering the configurability of your products and how this is executed into ERP.

Time: 15:10 – 16:10

Room: South Wing 1

Mendix – Seeing is believing – a live app development

Get a glimpse into the low code development process, look under the hood with our expert developers and discover how an idea can turn into an app in this session.

Time: 15:10 – 16:10

Room: South Wing 2

Simcenter CAE – Composite Structures & Analysis

This is a session orientated towards anyone involved in the design and manufacture of composite structures, including structural analysis to failure and beyond looking at delamination simulation. It will cover composites layup design for manufacture​, composites analysis using FEA​ and delamination.

Time: 15:10 – 16:10

Room: South Wing 3

Getting the most from NX CAM

In this session we will look at the tools available to easily create a full machine set up within your CAM environment, quickly simulate the G code program in a virtual prove out and automatically generate documentation for the shop floor.

Time: 15:10 – 16:10

Room: South Wing 4a

OnePLM Itemise – Solid Edge Data Exchange and BOM Management

This session will show a solution for automatically capturing and sharing SE Bills of Materials, together with associated data files such as PDF and DXF, readily accessible/extensible in real-time across all departments.

Time: 15:10 – 16:10

Room: South Wing 4b

Don’t miss out on the largest
Siemens PLM User event

Book your tickets now

Meet our sponsors

“Its always a great experience at DU2023. The whole team learn something new from the industry leaders’ experiences.”
Product Manager
“Its always a great experience at DU2023. The whole team learn something new from the industry leaders’ experiences.”
Product Manager
“Its always a great experience at DU2023. The whole team learn something new from the industry leaders’ experiences.”
Product Manager

Frequently Asked Questions

July 5th 2023
8.30AM – 4.30PM

The British Motor Museum
Banbury Road
Gaydon, Warwick
CV35 0BJ

There are 50 technology sessions to choose from. You can select 5 and customise your own agenda. To do this, click ‘Register Now’ on this page. You can select the sessions you want to attend when signing up.

OnePLM’s Technical teams will lead the technical discussions and demonstrations on the day. However we will have guest speakers throughout the event. There will be internationally recognised speakers and product specialists that will lead discussions so you can get the latest information, directly from the source.

The event is free to attend. All refreshments and lunch is included. Parking is free and end of day museum access is also free.

The sessions will not be recorded, however we will put together an event pack that contains the key information covered on the day for each product. For example, if you want to see more about Solid Edge, inform your account manager after the event and they will send you a downloadable file that contains the best bits that you can explore further.

If you find that you need more information or a deeper dive into the product, no worries, we can setup a call with you and explore it further.

Due to the pandemic, it’s the first time we’re running this event since 2019. Typically, we only run this event once a year. So, it is not an event to miss out on.

Please secure your place today to ensure you get your ticket for this years event.

About the venue

The British Motor Museum (TBMM) holds the World’s largest collection of Historic British cars (400 available on site) from the British Motor Industry Heritage Trust and the Jaguar Heritage Trust. It’s a venue that visually depicts the history of Design & Manufacturing in the UK and a location we felt was ideal. TBMM is a spacious and modern venue with state-of-the-art facilities. All attendees will benefit from free all-day parking on site, refreshments and lunch provided, and access to explore the museum after the closing talks. 

 Need directions to the venue? Click below.
Directions to the venue